Registered withGas Safe
24 hours a day, 7 days a week · every London borough
Showers that run cold, lose pressure, leak or will not switch on, fixed or replaced properly. Day or night, in every London borough.
A leaking shower or a ceiling stain below it will not wait until Monday. We answer nights, weekends and bank holidays.
Cartridges, hoses, seals and shower heads carried on the van, so most jobs do not need a second visit.
You know what it will cost before we start. The invoice matches what you agreed to.
If a repair is worthwhile we do it. If the shower is past saving, we tell you and explain the options.
Floors and trays protected, old parts taken away, and the bathroom left as we found it.
Most shower faults come down to a worn cartridge, a blocked head or filter, or a pump or unit that has reached the end of its life. We find which, and fix what is worth fixing.
A shower that runs cold, cuts out or only dribbles. Often scale has blocked the unit or the head, and sometimes the unit has simply reached the end of its life. We tell you which, and replace like for like where that makes more sense.
Water that swings between hot and cold, will not get hot, or leaks from the valve. Usually it is a worn cartridge or a blocked filter, and we carry the common parts for popular makes.
A weak shower is often down to the supply, a blocked filter or an ageing pump. We check the flow, work out the cause and tell you what will actually improve it before recommending a new pump.
Stop using it. Switch off the shower. For an electric shower, switch it off at the wall isolator switch before anyone touches it, and do not use it again until it has been checked.
Stop the water. Turn off any isolation valves feeding the shower, or the stopcock, usually under the kitchen sink, if water is still coming through.
Then call us on 079 1616 8585. We are available 24 hours a day across London.
When a shower is past repairing, or you simply want a better one, we fit the replacement properly.
A fixed rainfall head with a handset on a riser rail, in chrome or matt black. We set the heights with you, fit the arm and rail firmly to the wall, and test every connection before we leave.
A thermostatic valve keeps the temperature steady and protects against sudden hot or cold swings. We replace worn valves and fit new ones, with access kept so they can be serviced later.
Where the water supply is weak, a pump can transform a shower. We size the pump to your system, fit it with isolation valves, and set it up so it runs quietly.
Looking at a full new shower or wet room? See our shower installation page.
A few of the showers we have fitted and repaired across London.
We repair, supply and fit showers, valves and pumps from all the major makes, and carry the common parts for them on the van.
We look at the problem, tell you what it needs and what it will cost, and only then start work.
| What we look at | Why it changes the cost |
|---|---|
| Repair or replace | A worn cartridge or a blocked head is a quick repair. An old unit with no parts available, or a repair that costs close to a new shower, is usually better replaced. |
| Type of shower | Electric, mixer, thermostatic and power showers each have different parts and different ways of failing. |
| Parts | Standard seals and hoses are inexpensive. Brand-specific cartridges and pumps for some makes cost more. |
| Access | An exposed valve is easy to reach. A concealed valve behind tiles, with no access panel, takes more time and may need the wall opened. |
| Limescale | In hard water areas, heads, filters and valves clog with scale. Descaling is quick, but badly scaled parts may need replacing. |
One number, every London borough, 24 hours a day. Call 079 1616 8585 or message us on WhatsApp.
Cold, leaking, low pressure or time for a new one. Call us any time, day or night, anywhere in London.
Call 079 1616 8585Accredited, approved & trusted
